can-newsletter.org - Miscellaneous

After-sales tester

For repair and maintenance of ECUs

2022-03-29 Softing has released its TDX.workshop tool. It comes with the U100 CAN interface module by Kvaser.

CAN Newsletter magazine

Improving automotive CAN diagnostics

2022-03-08 As automotive CAN FD networks are proliferating throughout today’s road vehicles, it is important to diagnose, if there is a fault on the CAN lines. As new features find their ways into the vehicle, the number of CAN nodes increase as well as t...

Internet of Things

Cloud solution for CAN networks

2022-02-16 The Cloudcommander from Odos combines the CAN-to-USB converter from Kvaser, the Leaf Light HS V2, with the IoT cloud platform from Odos to offer a complete CAN-to-cloud data monitoring and data-logging solution. Actronic-Solutions distributes the pro...

Multi-node network communication

Testing top column modules

2022-01-27 In this article, ITgroup introduced its end-of-line system Castle^IT for testing top column modules (TCM) and takes a general look on today’s quality standards in automotive. CAN and CAN FD also play a role.

E-bike and e-scooter tracker

Detailed information about CAN connection

2021-10-12 Taking e-bikes as an example, the Super Tracker from the company with the same name, can log data about the motor and, if applicable, the battery and the control panel via the CAN interface. But it can do more.

J1939 data logger

Without the need for a PC

2021-10-04 Titan S8-CAN by Madgetech (USA) is a data acquisition system for diesel engines capable of simultaneously measuring and recording up to 23 suspect parameter numbers (SPNs).

Platform

Hardware-in-the-loop solution

2021-09-29 With the Conix HIL Solution, B-Plus automotive launched another module for its Conix Platform. The scalable solution is used for the development and validation of ADAS/AD platforms and sensors. Simulation of vehicle communication is done via CAN (FD)...

CAN interfaces

Supported by automotive tool suite

2021-09-23 The recent T1 software analysis tool version from Gliwa Embedded Systems supports all CAN interfaces from Peak-System.

E-bike and e-scooter tracker

Analyzing battery status, mileage, service data, and more via CAN

2021-09-08 Super Tracker developed an IoT (Internet of Things) GPS tracker and a Saas (software as a service) platform displayed through a native app solution. They combined performances of tracking and Saas solutions that are currently available on the market ...

4G telematics unit

For fleet and device management

2021-07-29 TMU Pi3 telematics unit from Autopi (Denmark) is built on top of the Raspberry Pi 3 model A+ SBC (single-board computer). It can be connected to in-vehicle CAN networks via the OBD2 port.

4G-enabled data logger

CAN-to-Cloud solution

2021-07-27 The recent Kvaser partner Odosolutions (Odos) has integrated Kvaser's Leaf Light CAN interface hardware into its Cloud Commander logging device.

J1939 and CANopen

Diagnostic system for heavy-duty and off-road vehicles

2021-07-13 The Telematics Gateway from iWave is a vehicle diagnostics system that monitors key parameters of a vehicle from anywhere. It is built with four CAN interfaces and is suitable for heavy-duty trucks, off-road vehicles, emergency vehicles, and vessels.

CAN, CAN FD, J1939

Vehicle diagnostic tester with remote functionality

2021-07-08 With version 8 of the vehicle diagnostic tester Indigo, Vector offers possibilities to individualize remote diagnostics. Simultaneous communication over different network systems including Classical CAN and CAN FD as well as different diagnostic prot...

CAN (FD) router and data logger

Remotely controllable via Internet

2021-07-01 Peak-System Technik launched the PCAN-Router Pro FD with six CAN (FD) channels. It is optionally available with an RJ-45 Ethernet interface.

Diagnostic system

For in-vehicle engine development

2021-06-17 Kistler relaunches its Kibox as a modular and extendable powertrain diagnostics platform for engine development. The Kibox2 provides two CAN FD interfaces.

CAN Newsletter magazine

CAN decoder warns for malicious attacks

2021-06-07 The open-source Sigrok project is a set of drivers and tools. It provides a desktop oscilloscope and logic analyzer UI (user interface) that can control different instruments (from Siglent, Rigol, and others).

Recorder and analyzer

ADAS data acquisition system

2021-05-28 Siemens Digital Industries Software provides the Simcenter Scaptor (sensor capture) hardware and software tool chain tailored to capture, synchronize, process, and analyze the data streams inside of a vehicle.

Automotive testing

Data-acquisition device with Classical CAN and CAN FD

2021-04-29 The Granite 10 data-acquisition (DAQ) device from Campbell Scientific includes four general-purpose Classical CAN or CAN FD channels. It is an all-digital measurement and control DAQ.

Test driver assistant

Monitoring test drives

2021-04-26 The Safety Assistant Monitor (SAM) application by In-Tech is a digital “co-driver”, which documents all test results of the in-vehicle driver assistant systems during a test trip.

CAN FD visualizing tool

LCD display for in-vehicle messages

2021-04-15 Semsotec (Germany) introduced the DM-5.0-1 Monitor tool for visualization of messages from Classical CAN and CAN FD in-vehicle networks.