Digital I/O device
2020-08-11 Peak-System Technik and Emsa (Embedded Systems Academy) have jointly developed I/O devices with eight digital inputs and eight outputs.
Mobile machine I/Os
2020-08-03 Data Panel (Germany) offers the XtremeDB family of CANopen I/O devices. They are intended for off-highway and off-road mobile machines.
Embedded World 2020
2020-02-11 At the Embedded World 2020, Peak-System, German manufacturer and supplier of hardware and software around CAN, present products for CAN FD and for the first time also for CANopen FD.
2020-01-22 The Sedoio-C gateway by Sedo Treepoint has successfully passed the CANopen conformance test by CAN in Automation (CiA). It connects the company’s I/O system to a CANopen network.
2019-12-18 Peak-System continues its PCAN-Micromod-FD series. Ready-to-use motherboards in black aluminum profile housings are now available. Data is exchanged via CAN FD.
2019-12-10 Axiomatic has released the AX130770 CAN to two analog/digital isolated signals and one relay output converter for rugged engine applications. The products feature one isolated CAN port.
CANopen I/O module
2019-11-28 SYS TEC Electronic (Germany) presented on the SPS 2019 tradeshow its CoC-100 CANopen module based on an ARM Cortex M4 processor.
2019-08-06 Ametek has developed the Intelligent Control Module (ICM), a user definable device that connects with multiple vehicle systems to enhance control for end-users.
Joysticks and pedals
2019-07-12 Caldaro (Sweden) is focused on joysticks, pedals, as well as marine controls and levers. Many of the offered industrial products provide CAN connectivity.
2019-07-10 MTA’s MEC 97 modular electrical center is for the distribution of power and the protection of major electrical utilities in off-road applications. Upon request, it can accommodate a module for processing messages from CAN in digital outputs.
2019-07-04 CiA member Guangcheng offers a broad range of CANopen I/O modules and devices. They comply with CiA 301 and CiA 401.
2019-06-12 The JXM-IO-E30 expansion module by Jetter (Germany) is a universal and remote I/O node for self-propelled machines.
2019-05-02 Axiomatic has developed a 4‑on/off valve controller. The J1939-connectable device features also seven digital inputs and three LED outputs.
2019-04-18 At Bauma 2019, FSG (Germany) exhibited a joystick prototype with an Oled display integrated in the handle. The IP54-rated product provides CAN connectivity.
2019-04-17 At Bauma 2019, Epec (Finland) launched the XS6C master controller with six CAN interfaces. The related GL84 CANopen NMT slave modules provide two CANopen interfaces.
2019-04-12 At Bauma 2019, Imet (Italy) showed its radio remote HMI transmitters and the related receivers. The receivers’ CAN interfaces support CiA 301.
2019-04-10 Wuerth Elektronik ICS exhibites at Bauma 2019 its CAN-connectable products. They comprise control units, I/O modules, and displays.
Hannover Messe 2019
2019-04-10 Weidmueller has introduced a stepper control module for its U-Remote family, which provides optionally CANopen connectivity.
CANopen and J1939
2019-04-03 The 351CM007 CAN module from Elobau (Germany) connects operator controls and sensors with digital or analog outputs to CAN systems. The CAN protocols CANopen and SAE J1939 are possible.
Control unit and I/O module
2018-12-12 The measurement system dQ-road from dQdt is used to measure fuel consumption of production vehicles in real conditions on the road. Secure data processing is provided by the CAN technology from Microcontrol.