can-newsletter.org

Electronica 2022

CAN FD is set and CAN XL is coming

2022-11-21 The Electronica 2022 trade show with 2144 exhibitors and about 70 000 visitors saw some announcements regarding CAN technology. This includes new MCUs (micro-controller unit) and board-level products.

SPS 2022

PLC based on Arduino

2022-11-15 Controllino, Austria, showed at the SPS 2022 tradeshow its Controllino-Neo Arduino-based host controller featuring CANopen connect...

CiA 402 drive

Customizable to every motor

2022-11-23 Dunkermotoren, a part of Ametek group, has released the Nexofox BGE 5510 Dpro external controller, which can be used with motors o...

Linear actuator

Integrating encoder and drive

2022-11-21 Nanotec (Germany) launched the CANopen-connectable PSA56 drive unit combining the LSA56 hybrid linear actuator and the drive contr...

Arm Cortex-M0+ solution

With CAN FD communication

2022-11-25 Infineon Technologies announced the PSoC 4100S Max family. It features CAN FD as well as Flash memory and general-purpose inputs/outputs (GPIO) for human-machine interface (HMI) applications to support the Capsense touch sensors.

CiA 402 drive

Customizable to every motor

2022-11-23 Dunkermotoren, a part of Ametek group, has released the Nexofox BGE 5510 Dpro external controller, which can be used with motors of different manufacturers.

Electronica 2022

CAN FD is set and CAN XL is coming

Linear actuator

Integrating encoder and drive

2022-11-21 Nanotec (Germany) launched the CANopen-connectable PSA56 drive unit combining the LSA56 hybrid linear actuator and the drive controllers of PD4-E series.

Keypads and Co.

CAN equipment for construction machines

2022-11-17 Brehmer Electronics (Germany) produces and distributes devices ranging from keypads, joysticks and switches, to control units, displays, I/O modules, and telematics units.

Electronica 2022

MCUs for industrial applications with up to 10 CAN FD interfaces

2022-11-16 At Electronica 2022, Infineon Technologies launched the XMC7000 micro-controller unit (MCU) family with up to 10 CAN FD interfaces. It is suitable for industrial applications including industrial drives, electrical vehicle (EV) charging, two-wheel el...

Electronica 2022

CAN FD is set and CAN XL is coming

PLC based on Arduino

Customizable to every motor

Integrating encoder and drive

With CAN FD communication

Customizable to every motor

CAN FD is set and CAN XL is coming

Integrating encoder and drive

CAN equipment for construction machines

MCUs for industrial applications with up to 10 CAN FD interfaces

Cooperating in the field of Smarc modules

DC power supplies and loads

PLC based on Arduino

CiA 402 is the dominating drive profile